
	Hydraulic Tie Rod Type Cylinders
more....


	Double-Ended Hydraulic Cylinders
more....


	Mill Duty Type Cylinders
more....

AHP STD Series AHP-005/006/007

Block Type Hydraulic Cylinders

These cylinders are very compact in design & construction. Generally used where space is constraint. Widely used in clamping or fixture holding purpose. It can be operating at pressure up to 200 Bar. Single acting spring return & double acting types are available in this cylinder category.

Applications
• In Fixtures
• Dies

• Block Cylinder

• Compact Cylinder

• Threaded Body Cylinder

Double Acting / Single Acting (Spring Return), Push Type

Description :
Block cylinders are widely used in work holding fixtures and other short stroke applications.

Advantages :
As compared to the tie rod construction cylinders, these cylinders are very compact, due to the internal construction.
These cylinders are versatile, i.e. they can be mounted in many different ways.

Versions :
Two versions are available in all models.
• Double-acting
• Single-acting push type with spring return

Installation :
The cylinder can be mounted on the front side (rod side), rear side and side faces, as shown in figures.

Specifications :
Maximum operating pressure - 200 bar

Note :
• For side mounting, positive stopper should be provided to reduce the load on the clamping bolts (fig.3).
• For the single-acting, spring return cylinder a breather is provided.
It should be protected from cutting liquids and coolants.
• For ordering the seal kit, add the prefix 's' to the part number.

Compact Cylinder

Double Acting / Single Acting Rod End

Description :
Compact cylinders are solid piston, double acting cylinders and
are very compact in the axial direction.

Advantages :
• These cylinders are used where height is a constraint.
• Mounting of the cylinder is very easy.

Specifications :
• Maximum operating pressure - 150 bar
• Double rod end cylinders can be available on request.

Note :
• Due to compact design, port thread depth is short. Reduce the
standard connector thread length to suit the port depth.
• For ordering the seal kit, add the prefix 's' to the part number.

Threaded Body Cylinder

Single Acting (Spring Return), Push Type

Specifications :
• Maximum oil pressure 200 bar
• Return spring back pressure @ 1 bar

Note :
• As the cylinder is single acting spring return, a breather is provided.
It should be protected from cutting fluid and coolant.
• Heavy extensions to piston rod can influence return stroke of the
cylinder.
• Lock nut has to be ordered separately.
• For ordering the seal kit, add the prefix 's' to the part number.

Note : Special orders as per customer specifications are also accepted.

Description :
Solid piston threaded body cylinder is single acting, spring
return cylinder, suitable to use with hydro-pneumatic intensifier.

Advantages :
• The cylinder is most simple in construction and very easy for
maintenance.
• The piston force can be directly used for clamping (fig.1) The
piston force can be increased by using a clamping strap
leverage (fig.2)

Installation :
The cylinder can be mounted in two ways

1. Against front collar with thread lock nut - Front mounting

2. With back mounting holes - Rear mounting